Help selecting driver BXEB2
- rubberduck
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Sat Oct 13, 2018 9:39 pm
edit: nevermind this post
Last edited by rubberduck on Mon Oct 22, 2018 10:28 pm, edited 2 times in total.
Heyrubberduck wrote: ↑Mon Oct 15, 2018 4:41 pm8s2p comes out to 160v for 8 strips but your driver is 42v... did it work?I rewired everything and flickering seems gone.
Light is made of 2 fixtures wired in parallel.
2x 560mm strips in series (=42v)
8 pairs in parallel
Girls enjoying it
- rubberduck
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Sat Oct 13, 2018 9:39 pm
what was the flickering problem? the pot?Hey
2x 560mm strips in series (=42v)
8 pairs in parallel
Girls enjoying it
IMG_20181012_103119_HDR.jpg
Last edited by rubberduck on Mon Oct 22, 2018 10:28 pm, edited 1 time in total.
Nah, I would say a faulty connection was responsible
- rubberduck
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Sat Oct 13, 2018 9:39 pm
im trying to figure something out...
163w / 42v = 3.88a
3.88a / 8 sets = .485a
so your setup is running about .5a per set?
163w / 42v = 3.88a
3.88a / 8 sets = .485a
so your setup is running about .5a per set?
yes, more or lessrubberduck wrote: ↑Mon Oct 15, 2018 9:02 pmim trying to figure something out...
163w / 42v = 3.88a
3.88a / 8 sets = .485a
so your setup is running about .5a per set?