Page 3 of 3
Re: First time build. Help selecting the right strips for the job.
Posted: Fri Jun 28, 2019 1:53 am
by TEKNIK
Masyea wrote: ↑Fri Jun 28, 2019 12:44 am
Hlg-480H-42B
https://ledgardener.com/diy-led-strip-b ... bridgelux/
Take a read through this link and take a good look at the picture.
Let me know if something isn't clear
Re: First time build. Help selecting the right strips for the job.
Posted: Thu Aug 29, 2019 6:49 pm
by Masyea
Anyone that is using the light I’ve built have suggestions on the hanging height from the canopy when in flower?
Re: First time build. Help selecting the right strips for the job.
Posted: Sat Aug 31, 2019 11:21 am
by unkle_psycho
I'd say I'm using close enough, I run EB's at different currents...
Distance varies a lot but I'd start flowering with maybe 20-40cm, and later into flowering I try to keep most of my tops in the 10-20cm range. the few highest tops are at about 5cm from the lights.
This is with a system that has a little more punch then yours, now I have 550w in a 4x4. Earlier I was running 480w, and everything seemed similar.