Re: new 2 channel cutter strip
Posted: Tue Jul 09, 2019 11:59 am
At 100mA a bit of flat aluminum will be enough as a heatsink, but if you want it to last longer you would keep them as cool as you can
A friendly LED grow light community.
https://ledgardener.com/forum/
Aloha & Dennis Brown has been at the forefront of UV and cannabis since 1985. You were asking for more information on UV and then treat the knowledge like some kind of joke? https://www.solacure.com/horticulture.htmlgrisbi wrote: ↑Mon Jul 08, 2019 10:25 pmYou cannot put interview from a commercial website ... loool its not objectiv at allMarine2143 wrote: ↑Mon Jul 08, 2019 10:10 pmDennis Brown has been a leader in UV for years. The science is evolving at a rapid rate with LED and the work at SETI and Dr. Barber.https://www.solacure.com/hydromag1.html?viewfullsite=1
ok ok sir!Marine2143 wrote: ↑Tue Jul 09, 2019 3:43 pmAloha & Dennis Brown has been at the forefront of UV and cannabis since 1985. You were asking for more information on UV and then treat the knowledge like some kind of joke? https://www.solacure.com/horticulture.htmlgrisbi wrote: ↑Mon Jul 08, 2019 10:25 pmYou cannot put interview from a commercial website ... loool its not objectiv at allMarine2143 wrote: ↑Mon Jul 08, 2019 10:10 pmDennis Brown has been a leader in UV for years. The science is evolving at a rapid rate with LED and the work at SETI and Dr. Barber.https://www.solacure.com/hydromag1.html?viewfullsite=1
Damn, I should probably do a side by side with these and the uv chips I gotMarine2143 wrote: ↑Tue Jul 09, 2019 3:43 pmAloha & Dennis Brown has been at the forefront of UV and cannabis since 1985. You were asking for more information on UV and then treat the knowledge like some kind of joke? https://www.solacure.com/horticulture.htmlgrisbi wrote: ↑Mon Jul 08, 2019 10:25 pmYou cannot put interview from a commercial website ... loool its not objectiv at allMarine2143 wrote: ↑Mon Jul 08, 2019 10:10 pmDennis Brown has been a leader in UV for years. The science is evolving at a rapid rate with LED and the work at SETI and Dr. Barber.https://www.solacure.com/hydromag1.html?viewfullsite=1
Now THAT sounds like an observation worthy of a study. If cannabis can be morphologically altered by air pressure (via elevation here) to a noticeable degree, it could become commercially profitable to control that variable.Marine2143 wrote: ↑Tue Jul 09, 2019 8:22 pmAloha & The problem with UV is short life cycles. Like Dr. Barber said there is more work to do with lifespan and optics. What we notice in Hawaii with elevation the same clone seems to have thinner leaves more THC and terpenes than the ones at sea level.
Hey Mark, any more info on these strips? Price/dimensions/general possibilities? I cant find them on your webgrisbi wrote: ↑Mon Jul 08, 2019 11:38 amnew strip board with 2 channels for supplementing the 272, can be 12 led in series or 2 channels of 6 for XP size leds
hello guyz!! i might need your help on doing my emmerson effect / uv strip for cannabis grow
those strip gonna work with 12 x 3535 led format, and that is amazing!!
first you can use those strip to put in the new cree xpe2 and we will can use the @TEKNIK pc red and pc blue led!!!
for the moment i will need UV and 730 emmerson effect strip to complet my setup:
so its gonna be 6 x cree xpe2 730nm + 6 uv led
i need you guyz to make me the best uv led cocktail for canabis grow, i dont know a lot about uv led, that why im asking here!
cheers