Here the shopping list from the build, including shipping, tax and import fees:
9x 1' Q-series strips(bought 10)from Digikey.com = $113
1x Meanwell HLG-60H-C700A from TME.eu = $48
3x 1m aluminium U channels 20mm x 20mm x 2mm from local Bauhaus store = $40
4x Wago connectors and 10m 0,75mm2 solid wire from Conrad Elektronik = $12
1x rool of Ceatech thermal tape 20mm from eBay(USA) = $48
Mountings, nuts and bolts from local hardware store = $7
Total =
$268
Shipping, import fees and stuff like thermal tape(same price as the driver
![Laughing :lol:](./images/smilies/icon_lol.gif)
) make a small build like this relatively expensive, but that should even out on a full build.
I found a local online store that sells aluminium U channel at a reasonably price
This test build pretty much got me to make up my mind and decide to go with 4' strips, and I'm leaning towards the single row F-series.