And with 4x S04 1 foot Hinflux I need to use HLG-150H-24 A or B? ThanksShimbob wrote: ↑Fri Aug 23, 2019 7:23 pmNot the greatest combo as pumping 1.4A into the S04 strip would be running them at 88% max, a bit on the higher side.Hello! I know this is a old post but I’m planinrg build the same setup with same driver but with 6x of this strips:
https://www.arrow.com/en/products/sl-b8 ... lectronics
I think is the same strips as yours but I want the 281mm size.
I have a 2x2 tent and I want to know how is working yours! Any advice will be so good for me!
Thanks in advance!
Also, this setup would be 48W per square foot, significantly higher than recommended, unless you're running CO2?
Consider using an HLG-150H-24 instead, 1.05A per strip and a perfectly reasonable 35Wpsf
Driver matching for H inFlux strips
-
- LED-Curious
- Reactions:
- Posts: 13
- Joined: Fri Aug 23, 2019 1:19 pm
- Location: Colombia
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
A is cheaper, and the dimming is done by screws under the driver. B is a bit more expensive, and there are wires for external dimming.420TomBombadil wrote: ↑Sat Aug 24, 2019 1:03 pmAnd with 4x S04 1 foot Hinflux I need to use HLG-150H-24 A or B? ThanksShimbob wrote: ↑Fri Aug 23, 2019 7:23 pmNot the greatest combo as pumping 1.4A into the S04 strip would be running them at 88% max, a bit on the higher side.Hello! I know this is a old post but I’m planinrg build the same setup with same driver but with 6x of this strips:
https://www.arrow.com/en/products/sl-b8 ... lectronics
I think is the same strips as yours but I want the 281mm size.
I have a 2x2 tent and I want to know how is working yours! Any advice will be so good for me!
Thanks in advance!
Also, this setup would be 48W per square foot, significantly higher than recommended, unless you're running CO2?
Consider using an HLG-150H-24 instead, 1.05A per strip and a perfectly reasonable 35Wpsf
"Nothing is true, everything is permitted"
-
- LED-Curious
- Reactions:
- Posts: 13
- Joined: Fri Aug 23, 2019 1:19 pm
- Location: Colombia
Ok got it! But will run 4 of this: https://www.arrow.com/en/products/sl-b8 ... lectronics that driver?unkle_psycho wrote: ↑Sat Aug 24, 2019 2:16 pmA is cheaper, and the dimming is done by screws under the driver. B is a bit more expensive, and there are wires for external dimming.420TomBombadil wrote: ↑Sat Aug 24, 2019 1:03 pmAnd with 4x S04 1 foot Hinflux I need to use HLG-150H-24 A or B? ThanksShimbob wrote: ↑Fri Aug 23, 2019 7:23 pm
Not the greatest combo as pumping 1.4A into the S04 strip would be running them at 88% max, a bit on the higher side.
Also, this setup would be 48W per square foot, significantly higher than recommended, unless you're running CO2?
Consider using an HLG-150H-24 instead, 1.05A per strip and a perfectly reasonable 35Wpsf