LEDgardener

Hello Guys,
I found your diy builds for a 4x4 setup using 4 of these strips for the setup.
My question is, can I add 2 more strips to this setup with the one Mean Well HLG-480H-48A Driver??? This would make a total of 6 strips in parallel , would this be enough driver for all 6 and be at typical operation. I will be using Co2!! No tent involved..
Thanks for your time!!!!
Don

Thanks for the reply's!!!
What do you about just getting 2 Mean Well HLG-480H-48A drivers and install 3 strips to each???

Yes you can add more, just keep adding them in parallel and everything's good. The more you add the higher the efficiency. There's no limit to how many you can add, except space, your wallet, and sanity.

Since you're running 6 strips and co2, I would upgrade to the 600w driver, which would put each strip at ~57% capacity.