A little help for my new grow set up. Eb series gen.3 + 660 + uvb?
Posted: Sun Oct 20, 2019 2:03 pm
Hi to all guys. It's time to change my citizen cobs and old leds. I was thinkin about' two possible setups:
Option A: 11/12 Bridgelux EB series Gen.3 4000k @1050ma (hlg 240h c1050a) in a box of 73cm x 73 cm (diy growbox with drywall panel) around 230 watt. (4 plants hempy bucket with mainlining (8 colas), i stay small)
Option B: 15 Bridgelux EB series Gen.3 4000k @1050ma (hlg 320h 1050a) in a box of 80 cm x 80 cm. Around 312 w. (also here mainlining with 4 plants in hempy buckets but 4 gallons instead of 3)
Which is better? any other options in this range of wattage?
Now my questions are: How many watts of 660nm (cree xpe photo red) per square foot (relative to the 4000k spectrum of the stripes) and how many watts of UVB leds (SemiLEDs Ultra Violet UVA LED (390-400nm)).?
I'd like to run the leds with another driver, obviosly..like @500ma
And now guys..just some suggestions guys. I want to make a good set up. Using the 4000k strips with the right quantity of 660nm i can almost replicate the spectrum (tested in laboratory) of the good Deadmau5 plug v3)..plus i really ike to have fun with leds. Thank for passing by and have a nice weekend..
Option A: 11/12 Bridgelux EB series Gen.3 4000k @1050ma (hlg 240h c1050a) in a box of 73cm x 73 cm (diy growbox with drywall panel) around 230 watt. (4 plants hempy bucket with mainlining (8 colas), i stay small)
Option B: 15 Bridgelux EB series Gen.3 4000k @1050ma (hlg 320h 1050a) in a box of 80 cm x 80 cm. Around 312 w. (also here mainlining with 4 plants in hempy buckets but 4 gallons instead of 3)
Which is better? any other options in this range of wattage?
Now my questions are: How many watts of 660nm (cree xpe photo red) per square foot (relative to the 4000k spectrum of the stripes) and how many watts of UVB leds (SemiLEDs Ultra Violet UVA LED (390-400nm)).?
I'd like to run the leds with another driver, obviosly..like @500ma
And now guys..just some suggestions guys. I want to make a good set up. Using the 4000k strips with the right quantity of 660nm i can almost replicate the spectrum (tested in laboratory) of the good Deadmau5 plug v3)..plus i really ike to have fun with leds. Thank for passing by and have a nice weekend..