Hi All,
i have 20 x 2ft 3500k strips and a HLG-320H-42A driver. How would i wire this to get close to the maximum wattage?
Thanks in advance
EB Gen 2 2ft help needed
2 Series / 10 Parallel Circuit will get you the full Wattage (320+ Watts) from the HLG-320H-42A LED Driver (@ 21 - 42 Vdc).
Two (2) Bridgelux 560 mm Gen 2 wired in Series are 39 Vdc (19.5 Vdc each). Good Luck.
Bridgelux Gen2 Datasheets... https://www.bridgelux.com/sites/default ... ev%20A.pdf
HLG-320H-42A Datasheet... https://www.meanwell.com/Upload/PDF/HLG ... H-SPEC.PDF