Basic First-timer Samsung Strip Build
Posted: Tue Feb 20, 2018 7:40 pm
Good afternoon everybody,
Quite new to the LED gardening scene; originally I had focused on CFLs back in the day and recently thought I would get into LEDs, foolishly purchasing one of those UFO models on Amazon.
Long story short(ish) I have put together a build and started ordered minor parts for the project. I am going to be using 12x of these Samsung SI-B8V05128HUS 1 foot strips (as a Canadian there are not many other 1 foot options at the moment with the specs I am looking for). This will be mounted onto a suitably sized heatsink for my 2x2x4 tent.
Aside from the driver and strips, all the basic parts and a potentiometer have been ordered. With that being said, I am having some difficulty determining the best Meanwell driver to use for this project and I would be open to some suggestions. As well, any other suggestions regarding this build would be greatly appreciated; as I said this will be my first DIY attempt.
Cheers to all!
Quite new to the LED gardening scene; originally I had focused on CFLs back in the day and recently thought I would get into LEDs, foolishly purchasing one of those UFO models on Amazon.
Long story short(ish) I have put together a build and started ordered minor parts for the project. I am going to be using 12x of these Samsung SI-B8V05128HUS 1 foot strips (as a Canadian there are not many other 1 foot options at the moment with the specs I am looking for). This will be mounted onto a suitably sized heatsink for my 2x2x4 tent.
Aside from the driver and strips, all the basic parts and a potentiometer have been ordered. With that being said, I am having some difficulty determining the best Meanwell driver to use for this project and I would be open to some suggestions. As well, any other suggestions regarding this build would be greatly appreciated; as I said this will be my first DIY attempt.
Cheers to all!