Cc+CV driver? Will IT work?

Strip light questions and discussions go here (Samsung, Bridgelux, Photo Boost, Growcraft, etc.)
Post Reply
Geert
LED-Curious
LED-Curious
Reactions:
Posts: 18
Joined: Mon Jun 08, 2020 6:43 pm

Hello,

I've got at meanwell HLG 320H-24B driver.
This is cc+CV
I've got 28 Samsung h serie strips.
They run about 21v and with 28 i aim to Run Them soft
At 480ma.

Will these strips run these current with this driver?
Shimbob
LED Wizard
LED Wizard
Reactions:
Posts: 642
Joined: Mon Nov 27, 2017 11:29 pm

Are those LT-H562D strips?
Samsung engine calculator says they'll run at 22.6V for 303W total.
PeteR_1
LED Tinker
LED Tinker
Reactions:
Posts: 368
Joined: Sun Jul 05, 2020 1:10 am

Geert wrote:
Sat Jun 12, 2021 5:13 pm
Hello,
I've got at meanwell HLG 320H-24B driver.
This is cc+CV
I've got 28 Samsung h serie strips.
They run about 21v and with 28 i aim to Run Them soft
At 480ma.
Will these strips run these current with this driver?
The answer is YES... This 320 Watt Driver can run those 28 Strips "Soft"...

320 / 28 = 11.4 Watts each strip
11.4 / 22.5 Vf = 0.506 Amps, up to ~ 506 mA each strip (-24B suffix Driver can be Dimmed if required)
Note: 506 mA is only 42% of 1200 mA (1.2 Amps) the max rated Amps...


H-Series LED Strips; LT-H562D Datasheets... https://static6.arrow.com/aropdfconvers ... series.pdf
Geert
LED-Curious
LED-Curious
Reactions:
Posts: 18
Joined: Mon Jun 08, 2020 6:43 pm

Thanks, i know u run Them verry soft, but this gives me verry good spread
Post Reply