Page 1 of 1
Cc+CV driver? Will IT work?
Posted: Sat Jun 12, 2021 5:13 pm
by Geert
Hello,
I've got at meanwell HLG 320H-24B driver.
This is cc+CV
I've got 28 Samsung h serie strips.
They run about 21v and with 28 i aim to Run Them soft
At 480ma.
Will these strips run these current with this driver?
Re: Cc+CV driver? Will IT work?
Posted: Sat Jun 12, 2021 6:04 pm
by Shimbob
Are those LT-H562D strips?
Samsung engine calculator says they'll run at 22.6V for 303W total.
Re: Cc+CV driver? Will IT work?
Posted: Sat Jun 12, 2021 6:09 pm
by PeteR_1
Geert wrote: ↑Sat Jun 12, 2021 5:13 pm
Hello,
I've got at meanwell HLG 320H-24B driver.
This is cc+CV
I've got 28 Samsung h serie strips.
They run about 21v and with 28 i aim to Run Them soft
At 480ma.
Will these strips run these current with this driver?
The answer is YES... This 320 Watt Driver can run those 28 Strips "Soft"...
320 / 28 = 11.4 Watts each strip
11.4 / 22.5 Vf = 0.506 Amps, up to ~ 506 mA each strip (-24B suffix Driver can be Dimmed if required)
Note: 506 mA is only 42% of 1200 mA (1.2 Amps) the max rated Amps...
H-Series LED Strips; LT-H562D Datasheets...
https://static6.arrow.com/aropdfconvers ... series.pdf
Re: Cc+CV driver? Will IT work?
Posted: Sat Jun 12, 2021 6:20 pm
by Geert
Thanks, i know u run Them verry soft, but this gives me verry good spread