Yep, 320w drivers for each white CCT, then the 120w for the 660nm.
Odd they have LV and HV going on. I'm guessing in parallel on the white channels, then a big series/parallel on the reds.
Any way to show the wiring from board to board?
You are right. Parallel on 320w drivers. The 100w driver output goes to a T connector. I have no idea how that hooks to anything. Each strip has 1 input. The controller unit has 1 input.
I got the light not hooked up. I'm unfamiliar how the T goes to.
So can I just hook up the 320w driver to the 4 strips in parallel? I just wouldn't have the 660nm?
There are only a few 660nm diodes in those strips? Would i still be able to flower or just use them for veg?
So can I just hook up the 320w driver to the 4 strips in parallel? I just wouldn't have the 660nm?
There are only a few 660nm diodes in those strips? Would i still be able to flower or just use them for veg?
Thanks
Yes appears that way. You don't "need" the 660 to flower/.