Hi all
I'm wondering if anyone could possibly help.
I am trying to build my first strip light build and i'm getting a little confused by the math and understanding of it all.
I have been to the DIY guide page and that is what i'm basing my question off.
In the guide for the 2x3 space we use 24 strips for the HLG-240H-20B driver, this is unfortunately out of stock on Digikey. the next step up is 15x 2 foot strips( https://www.digikey.co.za/en/products/d ... B3/7907663) and uses the HLG-320H-20B driver which is in stock at Digikey.
my question is would it be possible to double up on the number of 1 footers in comparison to 2 footers(https://www.digikey.co.za/en/products/d ... B3/7907665) so instead of 15 2 foot strips i would use 30 1 foot strips, i would prefer to use the 1 foot strips as it allows a bit more custimisation of the config and spacing.
I hope someone could help me with thing as i am really wracking my brain aver it.
Help with EB Gen 2 build
Thank you so much for all the feedback.
would i wire the strips in parallel, like pictured in the first diagram here?
just a 2 daisy chain instead of 3?
Really looking forward to hearing your feedback.