Powering three QB288.
Hey there, new here but like to lurk around and read. Anyways, wired up my first QB, 3 QB288 on a Slate 2 triple heatsink power by a HLG-320H C1750A In series. Not knowing a lot about electricity I am just curious.. so following HLG chart (using this as an example) at 1400mA it’s putting 102 watts to the board, is that 102 watts to every board evenly? Gets a little warm turned up, plan is to buy a multi-meter and dial it in, I just don’t know if that’s the way to go about it. Thanks!