Dimmer for a set of 9 qb288
It maybe faulty, most of those pots are made dirt cheap and fuck up alot. I have pots fail all the time, I asked a company to make them better and they told me it was too difficult even if I wanted to spend double the price to prevent failures
Find me on Instagram led_teknik
Could somebody please explain me how to wire the dimmer to my 3 Meanwell drivers?
Heres the instructions http://prntscr.com/p830fl
Heres the instructions http://prntscr.com/p830fl
Connect all the dim wires to the same corresponding + and - wires comming out of the pot.
It's the same as connecting one POT but you connect 3 instead. A normal 1-10V POT can do 30 drivers or more
It's the same as connecting one POT but you connect 3 instead. A normal 1-10V POT can do 30 drivers or more
Find me on Instagram led_teknik
Get a better manual: https://www.meanwell.com/webapp/product ... HLG-240H-C
Page 4, DIM+ (Grey) and DIM- (Black)
I'm talking about the dimmer, not the driver. Of course I understand that the MeanWell driver has a positive DIM+ and a negative DIM- wire. But where do I connect the wires with the dimmer?
This is the dimmer instructions:
Usage: First connect the load and signal lines, then connect the AC input lines.
1. N is zero line
2. L IN as Live Line Input
3. L OUT is a live-line output
But it doesn't tell me which one is positive, which one is the negative, and what do I do with the third connector. I have no idea what is a "zero line" etc.
This is the dimmer instructions:
Usage: First connect the load and signal lines, then connect the AC input lines.
1. N is zero line
2. L IN as Live Line Input
3. L OUT is a live-line output
But it doesn't tell me which one is positive, which one is the negative, and what do I do with the third connector. I have no idea what is a "zero line" etc.
Sure, here's the dimmer:
http://prntscr.com/p8fnxw
Here's my drivers setup:
http://prntscr.com/p8fnqu
I also bought another dimmer but the circuit board is different, and it came without instructions:
http://prntscr.com/p8fo6o
Thanks for your help
http://prntscr.com/p8fnxw
Here's my drivers setup:
http://prntscr.com/p8fnqu
I also bought another dimmer but the circuit board is different, and it came without instructions:
http://prntscr.com/p8fo6o
Thanks for your help