Delta Electronics driver to power 4 qb288 @1750ma?

All things related to board-style lights (Quantum Boards, Logic Pucks, etc.)
Forum rules
Post Reply
violenzo
LED Enthusiast
LED Enthusiast
Reactions:
Posts: 37
Joined: Mon Feb 19, 2018 6:49 pm

Hi!What do you think about this setup, i have the necessity to run 4 qb288 from 1400 to 1750 ma. I found this driver:

https://www.digikey.com/product-detail/ ... D/10312991

Let's say 50v per board, 200 V...but i'm no electrician..


Is it a good choice? I have to run 250/300 watt. Thanks!
Top
Shimbob
LED Wizard
LED Wizard
Reactions:
Posts: 642
Joined: Mon Nov 27, 2017 11:29 pm

The numbers from the specs suggests it'll work fine, assuming 50V per board.
If those are authentic HLG boards you can get the Volts/amps data here
Top
Post Reply

Return to “Boards”