I just wired my 3x QB288s from Alibaba (LZ Led Tech) in 3000K+RED in parallel on my HLG-240-48A. (rated 5A 52V max)
So on max. power I should get 5A in total on 3 boards, and around 50 volts right?
When I measure my voltage on the driver output I only get around 42 Volts.
Is there something wrong?
Or is it because every QB288 only consumes 1.66A and at that current there is only 42V required?
Would really appreciate your help, this is my first post here btw
![Smile :)](./images/smilies/icon_e_smile.gif)
Best Regards from Germany