LEDgardener

It looks like you have the dim wires connected to a wago along with the output wires for the leds, is that correct?

I see it now, they used a bit of shrink tube to mark things, attach the wires to the pot. Negative to 0 and positive to 10

I attached the negative to 0v and positive to 10v but it's not working. The boards are running at full power and the dimmer is not doing anything, no matter if I use the remote control or the knob

Swap the wires, 10V to neg, 0V to pos?

Just tried inverting the wires... didnt work, boards are always running at full power. I even tried with the second dimmer. Not sure what im doing wrong.

Can you just get a normal POT? They are cheap

I've seen tons of people using these dimmers on reddit and forums. Even on Alibaba there are a lot of sellers who sells quantum board kits with a remote control dimmer exactly like the one I bought. There is no reason for it to not be working...

Look here, all of the kits use the exact same dimmer... https://www.alibaba.com/trade/search?fs ... 288+dimmer

can you please link me to a potentiometer on ebay or amazon that will be able to dim 3 meanwell drivers and 9 quantum boards?
hoping the third one i buy will be the good one lol

https://www.cutter.com.au/product/0-10v-dimmer/

I haven't seen these on eBay or Amazon but they are the easiest POT to use

Can I use this one?
https://fr.aliexpress.com/item/32965662 ... b201603_55