Page 1 of 1
R2T Sunbar sample testing data
Posted: Tue Apr 16, 2019 7:17 am
by r2thk
Hi All,
R2T Industry developed a new strip. It called Sunbar, 90*3cm with 150pcs samsung LM301B plus 5pcs Cree XPE660nm(or Samsung LH351H), see below data and photo. the Bar run at 80watt with heatsink
Re: R2T Sunbar sample testing data
Posted: Tue Apr 16, 2019 10:36 am
by Hydrofood
Looks nice.
What’s the difference in the 3 tests?
How high were the strips when tested?
Strip voltage?
Price?
Will heatsink be included?
Re: R2T Sunbar sample testing data
Posted: Wed Apr 17, 2019 9:56 am
by r2thk
Hydrofood wrote: ↑Tue Apr 16, 2019 10:36 am
Looks nice.
What’s the difference in the 3 tests?
How high were the strips when tested?
Strip voltage?
Price?
Will heatsink be included?
the different is the testing height , it is 12inch 18inch, 24inch. and it include the heatsink run at 80watt
Re: R2T Sunbar sample testing data
Posted: Thu May 09, 2019 9:49 pm
by Indiled
What spectrum of LM301B is used that gives the charts and data?
What voltage are they ran at?
Do they come with heat sinks or do they only need heat sinks when driven at 80watts?
Re: R2T Sunbar sample testing data
Posted: Fri May 10, 2019 9:57 am
by r2thk
Indiled wrote: ↑Thu May 09, 2019 9:49 pm
What spectrum of LM301B is used that gives the charts and data?
What voltage are they ran at?
Do they come with heat sinks or do they only need heat sinks when driven at 80watts?
3500K plus Cree xpe 660nm, the voltage bin is AZ, we used the driver is 48B
Re: R2T Sunbar sample testing data
Posted: Fri May 10, 2019 3:40 pm
by Indiled
Thanks,
Re: R2T Sunbar sample testing data
Posted: Sun May 12, 2019 3:52 pm
by Indiled
What about heat sinks?
I think there’s a misunderstanding about heat sinks.
Do the test at 80watts was with heat sinks,or they only require heat sinks at 80watts or above?
Also does the strips include heat sinks when purchased?
Re: R2T Sunbar sample testing data
Posted: Wed May 22, 2019 1:36 am
by r2thk
Indiled wrote: ↑Sun May 12, 2019 3:52 pm
What about heat sinks?
I think there’s a misunderstanding about heat sinks.
Do the test at 80watts was with heat sinks,or they only require heat sinks at 80watts or above?
Also does the strips include heat sinks when purchased?
for sure with heatsink