LEDgardener

Hi!What do you think about this setup, i have the necessity to run 4 qb288 from 1400 to 1750 ma. I found this driver:

https://www.digikey.com/product-detail/ ... D/10312991

Let's say 50v per board, 200 V...but i'm no electrician..


Is it a good choice? I have to run 250/300 watt. Thanks!

The numbers from the specs suggests it'll work fine, assuming 50V per board.
If those are authentic HLG boards you can get the Volts/amps data here