Driver replacement

[bunker931]

Hi guys, I am new here.

I have this LED light and 3 of the 6 drivers died at the same time (How in the hell...) and I want to find 1 or 2 replacement driver to replace all the original ones.

https://imgur.com/7UbtE5l
https://imgur.com/QVSeKP0
https://imgur.com/JXYgh5R

Do you guys have any recommendation for the replacement?

[Shimbob]

Hlg-60h-c700 might work, might fry it.
Can you measure the voltage coming out the drivers that do work?

[bunker931]

Sorry for the late reply

I have measure the output voltage. It was 93v.

[greengenes]

2 board total for the fixture? or is that 6 boards broken up into 2 sides of the fixture? Need to know more about the boards/modules it is driving.

In general theory yes, very doable to make it a single driver fixture.

[bunker931]

It is 3 boards per side. 6 boards in total and ran by 6 drivers.

[bunker931]

What do you think of ELG-240-C2100?

https://led.meanwell.com/webapp/product ... =ELG-240-C

2100mA 57~115V output. I should be ok if I put 3 boards per 1 driver in parallel, right?

[greengenes]

Ya two of those would work.

Or a single 480w driver...480h-c3500.

Parallel is probably easiest conceptually.