any experience with atlas-scientific (wi-fi-hydroponics-kit)

[stud]

nice bro , congrats ! we're all learning HA , don't worry . next for you is the EC and CO2 ?

[morrisraybrooks]

im still not able to calibrate my atlas-scientific ph sencor in tasmota i sent the

first i sent (cal,mid,7) in Console i got

03:27:35 CMD: cal,mid,7
03:27:35 MQT: stat/tasmota_84192C/RESULT = {"Command":"Unknown"}
03:27:44 MQT: tele/tasmota_84192C/STATE = {"Time":"2021-03-09T03:27:44","Uptime":"1T21:51:34","UptimeSec":165094,"Heap":26,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Wifi":{"AP":1,"****":"************","BSSId":"************","Channel":*,"RSSI":**,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:03"}}
03:27:44 MQT: tele/tasmota_84192C/SENSOR = {"Time":"2021-03-09T03:27:44","EZO":{"pH":7.34}} (retained)
03:27:54 MQT: tele/tasmota_84192C/STATE = {"Time":"2021-03-09T03:27:54","Uptime":"1T21:51:44","UptimeSec":165104,"Heap":26,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":2,"Wifi":{"AP":1,"SSId":"************","BSSId":"************","Channel":2,"RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:03"}}
03:27:54 MQT: tele/tasmota_84192C/SENSOR = {"Time":"2021-03-09T03:27:54","EZO":{"pH":7.35}} (retained)

How or what did you do to calibrate your sensor am i missing something
help a brother out..stud and yes EC then Fertigation system is for sure is on the radar

[stud]

Sensor78 cal,mid,7

It's mentioned on the tasmota ezo help page.
https://tasmota.github.io/docs/EZO/

[morrisraybrooks]

ahh thank you sir will try it in a bit

[morrisraybrooks]

thanks stud that worked like a charm

[stud]

thanks stud that worked like a charm

congrats , follow this post if you want to calibrate with HA :
viewtopic.php?f=35&t=6068

[Elburro24]

Anyone get ec working?

[morrisraybrooks]

hadn't got to work on it yeti got mine coming in the mail now they just confirmed shipment today im a happy guy

[stud]

Anyone get ec working?

yes , i got the EC probe from Atlas with EZ carrier shield working on Tasmota + HA .

[morrisraybrooks]

hey stud think you could help a fella out
I'm having trouble with the calibration of my ec probe
first off I'm running it through the WiFi-hydroponics-kit with tasmota 9.2 custom
I all ready calibrated the EZO-PH sensor with your help an it works great
now trying to calibrate the EZO-EC sensor and having trouble maybe I'm doing it wrong
this is what i have ran so far

WiFi hydro kit calibration commands
#--------------------------------------------
PH #
Sensor78 ph:cal,mid,7 # THE PH COMMANDS WORKED LIKE A CHARM
Sensor78 ph:cal,low,4 #
Sensor78 ph:cal,high,10 #
#---------------------------------------------
EC #
Sensor78 ec:cal,dry # the EC commands work ---well they run through the console without errors
Sensor78 ec:cal,low,12880 # but the reading don't change after issuing low or high command
Sensor78 ec:cal,high,80000 # when i issued the Sensor78 ec:cal,dry command it did seam to zero it out
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
hydro kit console window

3:56:23 MQT: tele/tasmota_84192C/STATE = {"Time":"2021-04-03T23:56:23","Uptime":"0T00:29:29","UptimeSec":1769,"Heap":25,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Wifi":{"AP":1,"SSId":"tuna78killer","BSSId":"D8:47:32:FC:FF:E1","Channel":10,"RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:03"}}
23:56:23 MQT: tele/tasmota_84192C/SENSOR = {"Time":"2021-04-03T23:56:23","EZO-1":{"pH":5.64},"EZO-2":{"EC":72280.000}} (retained)
23:56:33 MQT: tele/tasmota_84192C/STATE = {"Time":"2021-04-03T23:56:33","Uptime":"0T00:29:39","UptimeSec":1779,"Heap":25,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Wifi":{"AP":1,"SSId":"tuna78killer","BSSId":"D8:47:32:FC:FF:E1","Channel":10,"RSSI":88,"Signal":-56,"LinkCount":1,"Downtime":"0T00:00:03"}}
23:56:33 MQT: tele/tasmota_84192C/SENSOR = {"Time":"2021-04-03T23:56:33","EZO-1":{"pH":5.64},"EZO-2":{"EC":72300.000}} (retained)
23:56:43 MQT: tele/tasmota_84192C/STATE = {"Time":"2021-04-03T23:56:43","Uptime":"0T00:29:49","UptimeSec":1789,"Heap":25,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Wifi":{"AP":1,"SSId":"tuna78killer","BSSId":"D8:47:32:FC:FF:E1","Channel":10,"RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:03"}}
23:56:43 MQT: tele/tasmota_84192C/SENSOR = {"Time":"2021-04-03T23:56:43","EZO-1":{"pH":5.64},"EZO-2":{"EC":72290.000}} (retained)


I'm doing the temp sensor next