Hey!
Got all these in the cart ready to order.
If anyone could take a look to see if I'm not missing or if I have anything wrong, that would be sweet.
6x LT-F562B 3000k
1x HLG-150H-24B
1x 100k Linear Pot (this is a 10 turn 5% tolerance pot - if my money is better spent elsewhere, please correct my choice)
Gonna run the F strips at 50% ~ 125W. This should give me something close my already existing fixture of 12x LT-H282D strips. I like the idea of having two independent fixtures to accommodate different plants/heights in the grow area.
As for heatsinks, I'll be improvising with Double U Aluminium profile (20mm wide, 18mm tall, 1mm thick).
As for all the connectors, wagos, cables, tools and whatnot, I have a warehouse full of those.
Can I order confidently?
Shopping cart confirmation - 2x2 F series
You can buy that same pot for $5 or less on eBay. I purchased one myself to have more control of the motion.
But in all honesty 100k pot will work just fine. No need to spend $17 on one.
Digikey has many models with tight tolerance for just a few dollars.
But in all honesty 100k pot will work just fine. No need to spend $17 on one.
Digikey has many models with tight tolerance for just a few dollars.
- Jolly Green Giant
- LED Wizard
- Reactions:
- Posts: 835
- Joined: Thu Jun 15, 2017 1:35 am
- Location: somewhere in NY
I bought a five pack for under $3.. so I have back ups.. first one I installed went bad in 2 months.. swapped it.. I've been going almost 1 and 1/2 years on second one... other smaller driver still using first cheap pot...
only thing with cheaper pots is the resistance.. more than likely you'll want to add a 5-10k resistor.. which are easy to add also..
only thing with cheaper pots is the resistance.. more than likely you'll want to add a 5-10k resistor.. which are easy to add also..