*Attempting* under current rdwc

[Mike]

Pics to come as products get delivered but nothing is a kit or from any under current systems.

Parts list:

5 8 gal square ez Stor containers w/ lids
4 6” mesh pots
1 1900 Eflux pump (6010)
1 small pond pump (drip ring pump for youngsters)
25’ 1/2” water line
10 1-1/2” bulkheads (slip-slip)
10’ 1-1/2“ pvc pipe
6 1-1/2” 90 degree pvc elbows
2 1-1/2” pvc tee fittings



4 drip rings
2-3 bags 3/4” hose clamps (10/bag)
4 1/2” shut off valves
2 1/2” tees
Pvc primer and glue

I’ve hand drawn some concepts but won’t share since my kids artwork is better than my plans.

[Mike]

This is the basic concept from the system with a bunch of alterations , but kind of see where I’m coming from.

New system will be based off the current culture design. With a 1-1/2 pvc pipe behind and in front of the plant bucket system and the reservoir in front of those

[Breed]

Are you pumping H2O through the drip rings continually with the small pump? I like the concept and may try to incorporate that into one of my little hydro grows.

[Mike]

Yea that’s how I currently run them. I got the drip rings on amazon for about $8 each. They work fantastically for transplant that’s roots won’t make it past the baskets yet. Once they get into the tanks it’s not helping much.

I’m going to try a current system to see if it helps they more mature plants. It will pull water thru the tanks and back to the reservoir

[Mike]

Quick note, the drip rings are on a timer. They are set for 10 minutes every 3 hours

[Mike]

And here come the parts...

Unfortunately I don’t buy things for a living so it’s going to be a few days for the rest.

[Mike]

Added parts list

4 way air pump
25’ line
4x air stones for tanks

[Mike]

[Mike]

Buckets, bulkheads, rough plumbing, eflux pump.

[Mike]

Lids and baskets