Ok dudes, here’s the beef...
If you google “diy ez clone build”, you’ll find all kinds of suitable aerocloner designs. All the good ones will get you near ~100% survival, with roots in, at most, 10 days to 2 weeks.
You’ll also find that on the actual process side, there are two opposing schools of thought: those who hold water temp at optimal dwc levels, and those who break the rules.
I’m gonna test this, with three 4-gal, 4-cutting
buckets, using 250 or 350 gph submersible pumps, pvc pipe/fittings, and 360 degree misters.
More to come....
Or_Gro’s tiny clone-off
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
nice
"Nothing is true, everything is permitted"
-
- LED Lover
- Reactions:
- Posts: 111
- Joined: Sun Apr 22, 2018 10:11 am
Along for the ride!
Looks like a solid build. Pumps looks almost over speced, could too much water pressure on those roots become a factor?
Looks like a solid build. Pumps looks almost over speced, could too much water pressure on those roots become a factor?
-
- LED Enthusiast
- Reactions:
- Posts: 76
- Joined: Thu Jun 20, 2019 11:18 am
Bring it on, my next project....
250 and 350 gph, ez-clone uses ~400 on similar sized bucket w 9 holes....i run a 350 on my 12 hole, 18-gal tote, no prob; was concerned 250 would be too low...we’ll see....Rocket Soul wrote: ↑Mon Jul 01, 2019 9:16 amAlong for the ride!
Looks like a solid build. Pumps looks almost over speced, could too much water pressure on those roots become a factor?
So, here’s my initial plan:
All buckets 5.8 pH, no roots no nutes
1 bucket will be:
- water temp 75F
- 1 mL garden friendly fungicide (Bacillus amyloliquefaciens strain D747), one time
1 bucket:
- water temp 75F
- 6ml/gal WORKING SOLUTION calcium hypochlorite (see below), every 3 days
1 bucket:
- water temp 85F
- 6mL/gal WORKING SOLUTION calcium hypochlorite (see below), every 3 days
Calcium Hypochlorite source is: To make 1 gal of WORKING SOLUTION:
Add 1g of HTH Pool Shock to 1 gallon RO water, mix well.
All buckets 5.8 pH, no roots no nutes
1 bucket will be:
- water temp 75F
- 1 mL garden friendly fungicide (Bacillus amyloliquefaciens strain D747), one time
1 bucket:
- water temp 75F
- 6ml/gal WORKING SOLUTION calcium hypochlorite (see below), every 3 days
1 bucket:
- water temp 85F
- 6mL/gal WORKING SOLUTION calcium hypochlorite (see below), every 3 days
Calcium Hypochlorite source is: To make 1 gal of WORKING SOLUTION:
Add 1g of HTH Pool Shock to 1 gallon RO water, mix well.
-
- LED Enthusiast
- Reactions:
- Posts: 76
- Joined: Thu Jun 20, 2019 11:18 am
What is the head capacity for each pump cuzzy?