Or_Gro’s tiny clone-off

[Frank Cannon]

I'd,,,,,,,,from this school

[Or_Gro]

Ok @TEKNIK & @Randomblame , let’s rumble!

Stuck an incandescent in with Mama...

She’s just a few days after bring flipped, and I just bumped her 4x96’s to ~400w atb, in a 3x3.

4x96:

1x65w:

Combined:

How many hour/day do you want me to run the incandescent?

[Or_Gro]

I'd,,,,,,,,from this school

The uniformity and spread are a little off...

But, with a little fine tuning, the girls get:

[Or_Gro]

Day 4: Pulled lids off, fixed leaks, topped up water, and dosed the “sterile” buckets w 15mLs working solution.

Also swapped out donut humidifiers far a 4L ultrasonic...

I really like the capability of this style donut:

but it shuts off on some schedule i haven’t been able to identify, then rh drops into 40%s.

The floating style donut:

runs continuously, but it puts out too much mist, soaking tent walls.

[TEKNIK]

Although that spectrum isn't set up the way I would conduct a test it won't hurt to see what happens, I would try it for an hour to begin with and increase it to 3 hours if you don't see anything happening, what you should see if it is working is the leaves droop a little while the bulb is on and then recover an hour after it's turned off. I am really not sure exactly how it will react exactly because I have not seen anyone try it before.

[Or_Gro]

Although that spectrum isn't set up the way I would conduct a test it won't hurt to see what happens, I would try it for an hour to begin with and increase it to 3 hours if you don't see anything happening, what you should see if it is working is the leaves droop a little while the bulb is on and then recover an hour after it's turned off. I am really not sure exactly how it will react exactly because I have not seen anyone try it before.

Yeah, lol, not set up your way, cuz i don't have all the spacely sprockets or the electrical intelligence of a rock...so i chose to take the the path of least resistance...

Also....lol, i’m just finishing up running it for 4 hrs....

Waddaya think, am i killin her?

[TEKNIK]

I can't really tell, hard to see these things with a picture, did the leaves droop at all compared to normal?

[ViridisHC]

Day 4: Pulled lids off, fixed leaks, topped up water, and dosed the “sterile” buckets w 15mLs working solution.

775B7A44-9B71-4CE7-B949-7E385D8D0965.jpeg


Also swapped out donut humidifiers far a 4L ultrasonic...

I really like the capability of this style donut:
1F91D374-7DAB-40E2-B203-A487B0AFB76D.jpeg
but it shuts off on some schedule i haven’t been able to identify, then rh drops into 40%s.

The floating style donut:
82EF21B2-8CD2-4133-945E-E580CB40C974.jpeg
runs continuously, but it puts out too much mist, soaking tent walls.

@Or_Gro I've been lurking on your grow logs for a bit. Assuming another Oregon grower? Wanted to ask if you could supply a link to that AgoHike humidifier as I'm having trouble finding it? I'm also experimenting using floating disc humidifiers for cloning except I've made some DIY fogponic type 3.5 gallon buckets. The floating disks I'm using work well but are quite a bit pricier. Another problem I believe I'm having is the floats for the disk are occasionally too rough with new cuttings if the water is too high. Seems like all of the cuttings that have failed have been physically broken by the floating disk self propelled movement in the buckets. I'm wondering if that type might work better for the method I'm using.

I've also been interested in tissue culture for a while and your log on it might convince me to pull the trigger on it, so thanks for that too!

[Or_Gro]

Day 4: Pulled lids off, fixed leaks, topped up water, and dosed the “sterile” buckets w 15mLs working solution.

775B7A44-9B71-4CE7-B949-7E385D8D0965.jpeg


Also swapped out donut humidifiers far a 4L ultrasonic...

I really like the capability of this style donut:
1F91D374-7DAB-40E2-B203-A487B0AFB76D.jpeg
but it shuts off on some schedule i haven’t been able to identify, then rh drops into 40%s.

The floating style donut:
82EF21B2-8CD2-4133-945E-E580CB40C974.jpeg
runs continuously, but it puts out too much mist, soaking tent walls.

@Or_Gro I've been lurking on your grow logs for a bit. Assuming another Oregon grower? Wanted to ask if you could supply a link to that AgoHike humidifier as I'm having trouble finding it? I'm also experimenting using floating disc humidifiers for cloning except I've made some DIY fogponic type 3.5 gallon buckets. The floating disks I'm using work well but are quite a bit pricier. Another problem I believe I'm having is the floats for the disk are occasionally too rough with new cuttings if the water is too high. Seems like all of the cuttings that have failed have been physically broken by the floating disk self propelled movement in the buckets. I'm wondering if that type might work better for the method I'm using.

I've also been interested in tissue culture for a while and your log on it might convince me to pull the trigger on it, so thanks for that too!

Thanks man!

I don’t believe i’ve used or mentioned an agohike humidifier...

[Or_Gro]

I can't really tell, hard to see these things with a picture, did the leaves droop at all compared to normal?

Teasing you, she just keeps lookin better and better...expecting big things from her!