Ehy Adam! Great! Can you gat orders from cutter too if a customer asks for a honest amount of components?Adam wrote: ↑Sat Oct 05, 2019 3:41 pmThat's just temporary.KasparGrower wrote: ↑Tue Oct 01, 2019 9:52 pm. I know that diyleduk doesn't ship outside the UK anymore due to Brexit,
Europe custom DIY Fixtures
-
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Mon Sep 30, 2019 5:22 pm
-
- LED-Curious
- Reactions:
- Posts: 3
- Joined: Tue Oct 08, 2019 12:07 am
Why you would spend 1.6-1.7k to get 1.5g/w. This can you do even better with a lot of CXB3590 at low power. I have run always within 1,7-2g/w with 9 cxb@1,2*1,2 on 1050mA. If you lower the power you can even use more of these to get a better uniformity of light but for me these works like crazy
-
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Mon Sep 30, 2019 5:22 pm
I will light my two tents with that amount of money. Having the ability to have different channels that I can dial in for each stage is great imho.speedygreeny wrote: ↑Tue Oct 08, 2019 12:17 amWhy you would spend 1.6-1.7k to get 1.5g/w. This can you do even better with a lot of CXB3590 at low power. I have run always within 1,7-2g/w with 9 cxb@1,2*1,2 on 1050mA. If you lower the power you can even use more of these to get a better uniformity of light but for me these works like crazy