https://www.digikey.com/product-detail/ ... ND/2207310
My drivers I bought are going to power 8 2ft bridgelux but the Calculations say it could power 14
Question is can I throw a few strips of these ir and a few of uva?
Or should I simply get a new driver and run them seperate
I'd like to mix some Ir/uv-a
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
Last edited by Cannadaled on Fri Nov 17, 2017 2:21 pm, edited 1 time in total.
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
- Jolly Green Giant
- LED Wizard
- Reactions:
- Posts: 835
- Joined: Thu Jun 15, 2017 1:35 am
- Location: somewhere in NY
if they run same voltage and current as your other strips it should not be a problem...
I probably would run on a different driver though.. so I could dim them separately. and if you want to add more red/blue in the future they could go on same driver as uva/ir..
I probably would run on a different driver though.. so I could dim them separately. and if you want to add more red/blue in the future they could go on same driver as uva/ir..
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
There are lots of good benefits to uv and ir when it comes to bud ripening and terpine production
https://www.digikey.com/products/en/opt ... ockOnly=on
Not really sure what uv ir lights would be strong enough to hit the buds. A lot of these leds looks weak in the description
https://www.digikey.com/products/en/opt ... ockOnly=on
Not really sure what uv ir lights would be strong enough to hit the buds. A lot of these leds looks weak in the description
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
ACtually i did not find any research paper or review stating that ir is needed or hs that huge benefit.adam_leblanc123 wrote: ↑Fri Nov 17, 2017 4:07 pmThere are lots of good benefits to uv and ir when it comes to bud ripening and terpine production
https://www.digikey.com/products/en/opt ... ockOnly=on
Not really sure what uv ir lights would be strong enough to hit the buds. A lot of these leds looks weak in the description
Different story for UV light, but they do not state if the increse in "ripeness" is due to UV-A or UV-B not the quantity needed
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Wed Nov 15, 2017 2:07 pm
https://www.homedepot.ca/en/home/p.fluo ... 06852.html
Also could just get these holders I think..
And just use them to power the leds from growlights canada
Also could just get these holders I think..
And just use them to power the leds from growlights canada
I appreciate but I am afraid this states nothing, it tells us there are "right frequencies" but it doesnt state which these are and how much is needed.