eb gen2 strips in series, 200v too much for the series of strips?
whats the voltage rating of the board and wire connector?
thank you
bridgelux eb gen2 series wiring
- rubberduck
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Sat Oct 13, 2018 9:39 pm
Last edited by rubberduck on Sat Oct 20, 2018 6:37 am, edited 3 times in total.
Take a look at the specs here:
https://www.bridgelux.com/sites/default ... ev%20A.pdf
Specifically look at figure 5, which tells you what voltage the strips need at what current. At 700mA, the strips run at 39volts. 5 strips in series will require (5x39=)195V. 210 is just fine, the strips will be happy photon canons.
Usually the wire connectors on the strips are rated for a max of 300V. The boards themselves have no maximum voltage since its excessive current that will make them pop. Excessive voltage passes through them harmlessly.
https://www.bridgelux.com/sites/default ... ev%20A.pdf
Specifically look at figure 5, which tells you what voltage the strips need at what current. At 700mA, the strips run at 39volts. 5 strips in series will require (5x39=)195V. 210 is just fine, the strips will be happy photon canons.
Usually the wire connectors on the strips are rated for a max of 300V. The boards themselves have no maximum voltage since its excessive current that will make them pop. Excessive voltage passes through them harmlessly.
- rubberduck
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Sat Oct 13, 2018 9:39 pm
thank you
Last edited by rubberduck on Sat Oct 20, 2018 6:30 am, edited 1 time in total.