hi I would like to build a light to get 300/400 ppfd.
I would like to use the strips eb gen 2 any idea on how many and with which driver ?
thanks
mother box 4x8 eb gen 2
You could spread strips out over that area.
I would suggest making 2 lights so its easier to handle running 240W drivers.
If you used the gen3 as opposed to the gen2 then you would need about 20 2ft strips to cover a 4X4
4000K strips if you can get them.
Check responses from others also
I would suggest making 2 lights so its easier to handle running 240W drivers.
If you used the gen3 as opposed to the gen2 then you would need about 20 2ft strips to cover a 4X4
4000K strips if you can get them.
Check responses from others also
Find me on Instagram led_teknik