Hey gang, I purchased a set of EB Gen 3 Thrive strips in 4k for a veg light build, and was wondering which driver would be best suitable for a 4x4 setup.
Strip specs: https://www.bridgelux.com/sites/default ... ev%20A.pdf
I was thinking 5 or 6 strips powered by an HLG 320H C1400B or perhaps C1050B?
Thanks
Need help choosing driver for Veg light build
-
- LED Lover
- Reactions:
- Posts: 107
- Joined: Tue May 07, 2019 8:16 pm
- Location: Melbourne
- Contact:
I would not run these at 1400ma, better to break out into series/parallel groups to reduce drive current
https://www.cutter.com.au
LED DIY for Growers. Cree, Bridgelux, Lumileds and Nichia specialist. Solskin and Solstrips
LED DIY for Growers. Cree, Bridgelux, Lumileds and Nichia specialist. Solskin and Solstrips
-
- LED-Curious
- Reactions:
- Posts: 12
- Joined: Mon May 25, 2020 4:59 am
I think I look for a similar build. Maybe you could benefit of any answers I get on my questions in my post also if you're not already done with yours
Edited link
viewtopic.php?f=32&t=5989
Edited link
viewtopic.php?f=32&t=5989
-
- LED-Curious
- Reactions:
- Posts: 19
- Joined: Wed Nov 07, 2018 6:49 am
I’m going to run 6 3k thrives on an HLG320H-42b. Should run them at about 1200ma. I’ll mount them to small aluminum heatsinks. That should be plenty to keep them cool running them at 60% of max current.