Single 20v @350ma strip, on HLG-60H-C350?

[eladmitz]

Hi beautiful ppl,
Is it safe to run single strip (eb gen2) on HLG-60H-C350?
Driver CONSTANT CURRENT REGION: 100v-200v
Current adj: 210 -350.

Thanks

[eladmitz]

OK,
I watched ledgardener video :

And seems like it's not recommended..

[PeteR_1]

Is it safe to run single strip (eb gen2) on HLG-60H-C350?
Driver CONSTANT CURRENT REGION: 100v-200v
Current adj: 210 -350.

Probably Not safe for LED Driver, if the Strip is 20 Vf...

But, you could run a single strip on a Dimmed HLG-60H-24AB (or -24B) Driver, which has a CC region of 14.4 - 24 Vdc and can be dimmed down to ~ 10% (10K Ohm Resistor or 100K Ohm Pot @ 10K Ohm).
HLG-60H-24 LED Driver Datasheets... https://www.meanwell.com/webapp/product ... od=HLG-60H

[eladmitz]

Is it safe to run single strip (eb gen2) on HLG-60H-C350?
Driver CONSTANT CURRENT REGION: 100v-200v
Current adj: 210 -350.

Probably Not safe for LED Driver, if the Strip is 20 Vf...

But, you could run a single strip on a Dimmed HLG-60H-24AB (or -B) Driver, which has a CC region of 14.4 - 24 Vdc and can be dimmed down to ~ 10% (10K Ohm Resistor or 100K Ohm Pot @ 10K Ohm).
HLG-60H-24 LED Driver Datasheets... https://www.meanwell.com/webapp/product ... od=HLG-60H

Thanks, but the reason I'm asking is because that I have this driver lying around.
I'm trying to find meanwell driver that can run a single 20v strip with the option to adjust current between 350-700~ with internal io dimmer, but I cant find one.
The only one that I can find is xlg-25-a, but the constant current region of this driver is : 22 - 54v.
Does anyone have a suggestion for this kind of driver?

[PeteR_1]

Thanks, but the reason I'm asking is because that I have this driver lying around.
I'm trying to find meanwell driver that can run a single 20v strip with the option to adjust current between 350-700~ with internal io dimmer, but I cant find one.
The only one that I can find is xlg-25-a, but the constant current region of this driver is : 22 - 54v.
Does anyone have a suggestion for this kind of driver?

You're welcome.

1. You could run a single strip on a Dimmed HLG-40H-24B Driver (-24AB would be better), which has a CC region of 14.4 - 24 Vdc and can be dimmed down to ~ 15% - 35% (100K Ohm External Pot @ 15K - 35K Ohm)
HLG-40H-24B LED Driver @ Digikey... https://www.digikey.com/en/products/det ... f3e7cdd640
HLG-40H-24B LED Driver Data sheet... HLG-40H-24B LED Driver Datasheets... https://www.meanwell.com/Upload/PDF/HLG ... H-SPEC.PDF

2. Or a TRP 40 Watt LED Driver with a CC region of 7 - 22 Vdc and an external 100K Potentiometer...
TRP 40 Watt LED Driver @ Digikey... https://www.digikey.com/en/products/det ... -D/6574712
TRP LED40W-022-C1820-D Driver Datasheets... https://hubbellcdn.com/specsheet/LED-40W.pdf

3. Or Meanwell LED Drivers at 350 mA or 700mA @ 20 Vdc...
Meanwell LED Driver CC region 12 - 48 Vdc, 350mA @ 20Vdc = 7 Watts...https://www.digikey.com/en/products/det ... 50/7702569
Meanwell LED Driver CC region 9 - 24 Vdc, 700mA @ 20Vdc = 14 Watts... https://www.digikey.com/en/products/det ... 00/7702570

Good luck.

[eladmitz]

You're welcome.

1. You could run a single strip on a Dimmed HLG-40H-24B Driver (-24AB would be better), which has a CC region of 14.4 - 24 Vdc and can be dimmed down to ~ 15% - 35% (100K Ohm External Pot @ 15K - 35K Ohm)
HLG-40H-24B LED Driver @ Digikey... https://www.digikey.com/en/products/det ... f3e7cdd640
HLG-40H-24B LED Driver Data sheet... HLG-40H-24B LED Driver Datasheets... https://www.meanwell.com/Upload/PDF/HLG ... H-SPEC.PDF

2. Or a TRP 40 Watt LED Driver with a CC region of 7 - 22 Vdc and an external 100K Potentiometer...
TRP 40 Watt LED Driver @ Digikey... https://www.digikey.com/en/products/det ... -D/6574712
TRP LED40W-022-C1820-D Driver Datasheets... https://hubbellcdn.com/specsheet/LED-40W.pdf

3. Or Meanwell LED Drivers at 350 mA or 700mA @ 20 Vdc...
Meanwell LED Driver CC region 12 - 48 Vdc, 350mA @ 20Vdc = 7 Watts...https://www.digikey.com/en/products/det ... 50/7702569
Meanwell LED Driver CC region 9 - 24 Vdc, 700mA @ 20Vdc = 14 Watts... https://www.digikey.com/en/products/det ... 00/7702570

Good luck.

Thank u very much for your time.
As I can see, no internal dimmer option..
So if we go external, what do u think on -

LPF-16D-24 :
https://www.meanwell-web.com/content/fi ... D-spec.pdf

Thanks again

[PeteR_1]

Thank u very much for your time.
As I can see, no internal dimmer option..
So if we go external, what do u think on -
LPF-16D-24 :
https://www.meanwell-web.com/content/fi ... D-spec.pdf
Thanks again

You're welcome.
That should work OK...

Almost any Dimmable Driver that has an adequate Output Voltage Range and Adequate Wattage output can work in your application...
Just successfully tested a single (1) Bridgelux BXEB-L0560Z LED Strip with Dimmed 75 Watt , 8 - 25 Vdc LED Driver @ 140 mA (min) to 800 mA with a 100K Potentiometer.
Simply need an LED Drive that can output 7 - 14 Watts @ ~ 20 Vdc (350 - 700 mA @ ~ 20 Vdc)...

Bridgelux 560mm LED Strip... https://www.digikey.com/en/products/det ... B3/7907663
75 Watt TRP Driver... https://www.digikey.com/product-detail/ ... C3000-D-ND

[eladmitz]

You're welcome.
That should work OK...

Almost any Dimmable Driver that has an adequate Output Voltage Range and Adequate Wattage output can work in your application...
Just successfully tested a single (1) Bridgelux BXEB-L0560Z LED Strip with Dimmed 75 Watt , 8 - 25 Vdc LED Driver @ 140 mA (min) to 800 mA with a 100K Potentiometer.
Simply need an LED Drive that can output 7 - 14 Watts @ ~ 20 Vdc (350 - 700 mA @ ~ 20 Vdc)...

Bridgelux 560mm LED Strip... https://www.digikey.com/en/products/det ... B3/7907663
75 Watt TRP Driver... https://www.digikey.com/product-detail/ ... C3000-D-ND

Thanks!
Btw forgot to mention my strip is eb gen2 28mm