How to wire 8 strips in a HLG-320H-C1400B

[JahMenta]

Hello, i just bought 8 strips (Sun Board Grow Strip with 96 Samsung LM561C LEDs: https://growdaddyleds.com/collections/f ... m561c-leds) for a new build with a Meanwell HLG-320H-C1400B.

Im wondering wich is the beast way to wire the strips and how: series or parallel? im a bit confused.

Thank you very much!

[Nick]

I'm new but this video may help.

Those strips are rated at 1800ma but that driver only delivers 1400ma so....

1.4 x 24 x 8 = 268 watts if wired in series as shown in the video.
Be aware that wiring those in series creates a 192 volt DC circuit.

I'm using the same driver and number of strips but with slightly different strips.
Hopefully others will chime in.

Good luck with your build!

[PeteR_1]

Hello, i just bought 8 strips (Sun Board Grow Strip with 96 Samsung LM561C LEDs: https://growdaddyleds.com/collections/f ... m561c-leds) for a new build with a Meanwell HLG-320H-C1400B.
Im wondering wich is the beast way to wire the strips and how: series or parallel? im a bit confused.
Thank you very much!

That combination of eight (8) LED strips @ 24 Vf (Vdc) each and Meanwell HLG-320H-C1400B LED "Series" Driver can only be wired in Series at 192 Vdc (8 * 24 Vf = 192 Vf). Good Luck.


Series Wiring typical as shown for Eight (8) LED Strips