Q-series serial test build
Looks sharp! It's cool to see some Q series builds. How are you measuring power?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED Enthusiast
- Reactions:
- Posts: 42
- Joined: Wed Feb 07, 2018 1:49 pm
Thanks LG
In a main light build the strips should be a bit closer to each other, I think.
I measured power wtih a watt-meter on the AC side.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
In a main light build the strips should be a bit closer to each other, I think.
I measured power wtih a watt-meter on the AC side.
-
- LED Enthusiast
- Reactions:
- Posts: 42
- Joined: Wed Feb 07, 2018 1:49 pm
Here the shopping list from the build, including shipping, tax and import fees:
9x 1' Q-series strips(bought 10)from Digikey.com = $113
1x Meanwell HLG-60H-C700A from TME.eu = $48
3x 1m aluminium U channels 20mm x 20mm x 2mm from local Bauhaus store = $40
4x Wago connectors and 10m 0,75mm2 solid wire from Conrad Elektronik = $12
1x rool of Ceatech thermal tape 20mm from eBay(USA) = $48
Mountings, nuts and bolts from local hardware store = $7
Total = $268
Shipping, import fees and stuff like thermal tape(same price as the driver
) make a small build like this relatively expensive, but that should even out on a full build.
I found a local online store that sells aluminium U channel at a reasonably price
This test build pretty much got me to make up my mind and decide to go with 4' strips, and I'm leaning towards the single row F-series.
9x 1' Q-series strips(bought 10)from Digikey.com = $113
1x Meanwell HLG-60H-C700A from TME.eu = $48
3x 1m aluminium U channels 20mm x 20mm x 2mm from local Bauhaus store = $40
4x Wago connectors and 10m 0,75mm2 solid wire from Conrad Elektronik = $12
1x rool of Ceatech thermal tape 20mm from eBay(USA) = $48
Mountings, nuts and bolts from local hardware store = $7
Total = $268
Shipping, import fees and stuff like thermal tape(same price as the driver
![Laughing :lol:](./images/smilies/icon_lol.gif)
I found a local online store that sells aluminium U channel at a reasonably price
![Smile :)](./images/smilies/icon_e_smile.gif)
This test build pretty much got me to make up my mind and decide to go with 4' strips, and I'm leaning towards the single row F-series.