Pairs of slate 3 triple
-
Doctor Ledpot
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Mon Feb 26, 2018 7:02 pm
Has LG or anyone done a PAR test with pairs of HLG 320w kits or builds(I've seen the results of the single Slate 3 Triple(3 boards)test)? If so, would appreciate a link to the post(s), thanks.
What size space? How far apart?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
Doctor Ledpot
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Mon Feb 26, 2018 7:02 pm
The overall plan is a grow area of 5'X12' consisting of a row of 3 5'X4' SCROGs, so looking at the possibility of a pair of 3 board fixtures per each SCROG, or 6 fixtures total. Spacing would be whatever provides the most uniform coverage, thinking a pair of fixtures at least 10-12" apart over each individual SCROG. Of course the center SCROG would be receiving some crossover lighting from both of its neighbors. By the way, this row of SCROGs would be more or less centered in a 9'X16'+ grow room, so, in an open area.
By the way, I didn't, at first, include space info as I didn't expect anyone had done a PAR test fitting my exact circumstances, but thought that any test of a pair of these fixtures, in a 4X4, or whatever area, would at least give me some indication as to the merits of going this route.