I like these...
https://www.amazon.com/dp/B00KFCRATC/re ... B00650P2ZC
Noctua Fan with Focused Flow and SSO2 Bearing, Retail Cooling NF-F12 iPPC 3000 PWM
Sorry not sure if these will show up as links
Anyhoo, any advice on the best/simplest/most efficient options for wiring six 12v fans together would be very much appreciated.
These draw .3A@12v=3.6w each so if six are required then a power supply that supplies 12v 1.8A if in series, with six terminals is optimal? Any specific quality product suggestions? FYI I DIY with quality as the goal not economy...
Some for active cooling of my QB's and some for strategic circulation
Write up and more pics. of the current project forthcoming..my first build! Obsessed! Thanks for the guidance!
Guidance on powering multiple 12v fans, active cooling circulation and such
I would like to use some noctua fans too.
I suppose I can use a PWM dimming controller sold as a led dimmer or a DC motor like this https://www.amazon.com/HiLetgo-12V-40V- ... =pwm+motor
Shouldn't be a problem to use this with some dc fans
I suppose I can use a PWM dimming controller sold as a led dimmer or a DC motor like this https://www.amazon.com/HiLetgo-12V-40V- ... =pwm+motor
Shouldn't be a problem to use this with some dc fans
You’ll need a 12V power supply capable of at least 1.8A and you’ll need to wire them all up in parallel. You could just get a terminal strip or use Wagos for the power distribution.
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!