J.R.R.Toking wrote: ↑Thu Jun 07, 2018 5:22 am
J.R.R.Toking wrote: ↑Thu Jun 07, 2018 5:02 am
Well, they have these in stock now...3500K, but VF is 22.3V. I'm thinking this might present problems with my HLG-480H-48A driver I bought for the FB224B build.
(1)Would Mouser allow me to exchange the 2-month old (new, untouched) driver for one that would work for these Influx?
(2)What driver would be best for the 22.3V Influx strips for a 4x4 build?
(3)Are the Influx strips really worth getting? I'd hate to be a lab rat, and waste hundreds of dollars on an unproven light strip, lol.
Here's the link to the in stock Influx strips:
https://www.digikey.com/product-detail/ ... ND/8536573
Yeah, I'm checking out their stock twice a day, and iI've been close to pulling the trigger on the L04 3500K they have in stock, and had it been 3000K I would have
I think I want the L06 3000K which should have been in stock on the 8th....
Here's the overwiev of the H inFlux series:
https://www.digikey.com/products/en?FV=ffecf8a8
The only H inFlux strips you can use that driver with are the 560mm double row strips (L09) and as far as I can tell it will power 4-6 of these strips.
I don't think you can get a single driver to power a 4x4 build with H inFlux, and why would you when you can have multiple smaller drivers cheaper than one big.
It's very nice to have several lamps you can have on/off and hang at different heights and angles.
The voltage and ampere change depending on the strip, and it depends on how many strips you want to power and how hard you want to run them.
https://media.digikey.com/pdf/Data%20Sh ... 2-5-18.pdf
Yes, they're most certainly worth getting, the LM301B diode is the best you can get today, and you already know it from the Q-series and the recently released Quantum Board V2