Thank you for the support! It keeps us working hard!
Some more info about complex conditional triggering:
We want to do something very configurable but still easy to use, for example, the controller will be able to:
- Automatically adjust the power of the light within a specific range to keep the temperature of the growspace in another specific range.
- Activate a solenoid valve, send a mobile notification or turn on a device if a sensor is sending a specified data (e.g. Co2 under x ppm trigger a solenoid valve).
etc...
Again, we need the feedback/ideas of experienced growers with specifics needs. This project is open-source/hardware, just giving us ideas can greatly improve the quality of the final product!
Koada project (Open-source automation w/ RPI)
We received some nice stuff today:
8x vesta strip
2x HLG-100h-24b
1x Solenoid valve
We can now finish the features that allow spectrum change over time. With specific support for the vestas strip! (Possibility to choose a particular color temperature, not just the power of the driver)
For example, you could start with a 4500k spectrum and decrease slowly to 2700k during two weeks.
And the HLG-100h-24b were chosen on purpose because they can't go entirely off when dimmed remotely.
The goal is to test those drivers with PWM & a relay.
We also received a solenoid valve that we will use to develop a fair-priced co2 enhancer system. But this is not a priority.
We also added recently in our statistic system roadmap the ability to track power consumption.
8x vesta strip
2x HLG-100h-24b
1x Solenoid valve
We can now finish the features that allow spectrum change over time. With specific support for the vestas strip! (Possibility to choose a particular color temperature, not just the power of the driver)
For example, you could start with a 4500k spectrum and decrease slowly to 2700k during two weeks.
And the HLG-100h-24b were chosen on purpose because they can't go entirely off when dimmed remotely.
The goal is to test those drivers with PWM & a relay.
We also received a solenoid valve that we will use to develop a fair-priced co2 enhancer system. But this is not a priority.
We also added recently in our statistic system roadmap the ability to track power consumption.
Last edited by Hyakutak on Sun Jul 22, 2018 10:13 am, edited 3 times in total.
When you were talking about the pre-terminated power cable, you were talking about the Adafruit relay, right? Not the 1-10V MW drivers?
Yup.macthezazou wrote: ↑Thu Jul 19, 2018 4:40 pmWhen you were talking about the pre-terminated power cable, you were talking about the Adafruit relay, right? Not the 1-10V MW drivers?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Some news:
We just found the final name of our project: Koada
We're doing some stress testing on our relay & refactoring some server code to ensure stability & performance.
We're also working on an iOS & Android app that can easily configure/update a Koada Raspberry pi without installing it or using SSH. This is a crucial feature to have a plug & play system.
We just found the final name of our project: Koada
We're doing some stress testing on our relay & refactoring some server code to ensure stability & performance.
We're also working on an iOS & Android app that can easily configure/update a Koada Raspberry pi without installing it or using SSH. This is a crucial feature to have a plug & play system.
-
- LED Maniac
- Reactions:
- Posts: 423
- Joined: Wed Apr 04, 2018 12:00 am
- Location: Ohio, USA
This project is advancing pretty fast and has come a long way! I can't wait to see the end result!
NothinYet is my nickname
It’s a 1-10V dimming circuit rather than a 0-10V.
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!