Hi, would this work for a 3 x 2 space?
Six F Series LM-562B strips with the HLG-185-24 driver wired in parallel?
Which driver would be appropriate for running the same six strips in the series?
From what I have learned so far researching all this, I've gotten far enough along to know which driver use to wire in parallel. But I can't figure out how to tell which driver I could use to wire these six strips in series. Not fully educated on mAs yet.
I would really appreciate any help. Thanks for reading!
Please help me choose a driver
-
- LED Maniac
- Reactions:
- Posts: 423
- Joined: Wed Apr 04, 2018 12:00 am
- Location: Ohio, USA
That driver would be about perfect for getting about 180w (30w sq/ft.)
For series wiring, you could use the Hlg-185h-c1400, and if you wanted dimming, get the a or b version of the driver. That driver would put you roughly around 180w also.
For series wiring, you could use the Hlg-185h-c1400, and if you wanted dimming, get the a or b version of the driver. That driver would put you roughly around 180w also.
NothinYet is my nickname