Upgrading my lighting and I'm in a bit of a pickle. I realize this is a lot to ask and tried to do as much as I could to make answering this easier.
My Existing Setup
Veg Tent:
- 4 HLG QB288 V1s
1 HLG600h54b Driver
- 3 sets of: 4 Vero29-D's + HLG320h-c2100b
- 4 x 800pcs lm561c PCB
- 48V
3A - 6.5A
3.0/W conductivity
129-372W
Size: 900 x 280 x 2.0 mm
2700k
- 12 Vero29-D's
4 800pcs PCB
4 QB288 V1s
1 HLG320H-c2100b
1 HLG600h54B
Veg Tent:
- 4 HLG QB288 V1s
1 HLG320H-c2100b
- 2 sets of: 6 Vero29-D's + 1 HLG 320H-c2100b
4 800pcs PCB + 1 HLG600h54B
More broadly, I just want to run all my LED's really cool to get the most out of their efficiency and get the most out of my equipment. I know I'm hitting a voltage wall and was hoping their was some parallel wiring trickery I could pull to make this work.
If not, how would you go about wiring these up? I'm willing to buy a new driver if need be, just trying to keep costs is low as I can.
Thanks for reading.