No joy.
This is what I got:
pi@raspberrypi:~/tuya-convert $ sudo ./start_flash.sh
tuya-convert v2.4.4
AP mode not supported!
Please attach a WiFi card that supports AP mode.
======================================================
Cleaning up...
No screen session found.
No screen session found.
No screen session found.
No screen session found.
Closing AP
Exiting...
I followed this guide:
https://www.raspberrypi.org/documentati ... -routed.md
But same problem with "AP mode not supported!". I can still ssh to the pi with it's regular ip so my guess is the new config I set via the guide is being overridden.
Any hints?
