ATPinMotion wrote: ↑Tue Jan 29, 2019 5:12 pmAwesome! Thanks for the update! That's really 'cool'T-Time wrote: ↑Fri Jan 25, 2019 7:09 pmMeasured with laser gun/ thermometer probe:
I did all the strips separately and took the average temps. It was hard to measure with the gun and depending on the angle it would give different reads at the same spot, but You get the idea. They are runnning cool
Ambient temp 26*C
Back of the strip 27.3*C / 29*C
Front of the strip (white coating ) 29.3*C / 30*C
TC³ 29.3*c / 28*5C
Not sure of your conditions though - I'm guessing that is the bare strip at 2.2a? Or is that with the heat czink?
I know what you mean about temp readings - super finicky around the diodes... still, knowing your test conditions will provide a good data point for me, thanks again!
Thanks for the link, I have some EB gen 2's - T-Time just got some FB24's and that's what I was curious about.Hydrofood wrote: ↑Tue Jan 29, 2019 1:12 pmWhat exactly are you curious about regarding Eb gen2’s?
Eb Gen2 Thermals thread
https://www.rollitup.org/t/bridgelux-eb ... ls.957453/
I thought You were asking about my EB 2 strip temps.
I havent wired my FB24's yet.