Day 1 of flowering
Flower/Bloom Chamber
Strain: Medical Marijuan Genetics Candida (CD-1)
LED's: 6 x Samsung F-Series Gen.3 3000k 2' LED strips (LT-F562B w/ LM561C diodes)= 432 LED's total.
Power: 2.2A / 6 = 366mA per strip
Height to canopy: ~10"
Reservoir: 4L (1Gal) - tap water
Nutrients: Botanicare Pure Blend Pro Bloom 8ml, Pure Blend Pro Grow 8ml
PPM: 1000
pH: 6.2
Height of plant: ~6.5"
Growing Technique: LST
Notes: The last week had a lot of pH swing daily dipping down to 5.2, so slow growth. Steady now at around 6 and plant is growing very fast. Tips look slightly burned, possibly more from LEDs rather than from nute burn.
Veg Chamber
Strain: Expert Seeds Gorilla Glue #4 Auto
LED's: 5 x Bridgelux EB Gen.2 5000K 1' strips = 280 LED's total
Power: 700mA / 5 = 140mA per strip
Height:
Resevoir: 500ml (0.13Gal)
Nutriens Botanicare Pure Blend Pro Grow 0.5ml
PPM: 265
pH: 6.5
Notes: Roots are still growing but she seems very stunted and slightly deformed
Perpetual stealth dresser DWC LED grow
- Jolly Green Giant
- LED Wizard
- Reactions:
- Posts: 835
- Joined: Thu Jun 15, 2017 1:35 am
- Location: somewhere in NY
HELL YEAH!!! I'll be paying attention to the mmg Candida!!!! I've been wanting to try that!! or the nightingale
-
- LED Enthusiast
- Reactions:
- Posts: 49
- Joined: Sat Mar 30, 2019 6:58 pm
I'll be watching this one.
Very nice setup!
Please keep us posted on this.
Very nice setup!
Please keep us posted on this.
Week 2: Day 1
Flower/Bloom Chamber
Strain: Medical Marijuan Genetics Candida (CD-1)
LED's: 6 x Samsung F-Series Gen.3 3000k 2' LED strips (LT-F562B w/ LM561C diodes)= 432 LED's total.
Power: 2.5A / 6 = 416mA per strip
Height to canopy: ~12"
Reservoir: 4L (1Gal) - tap water
Nutrients: Botanicare Pure Blend Pro Bloom 10ml, Pure Blend Pro Grow 10ml, Liquid Karma 5ml
PPM: 1150
pH: 6.0
Height of plant: ~11"
Growing Technique: LST
Notes: Added Liquid Karma and diy Co2
Veg Chamber
Strain: Expert Seeds Gorilla Glue #4 Auto
LED's: 5 x Bridgelux EB Gen.2 5000K 1' strips = 280 LED's total
Power: 700mA / 5 = 140mA per strip
Height:
Resevoir: 500ml (0.13Gal)
Nutriens Botanicare Pure Blend Pro Grow 1ml
PPM: 400
pH: 6.3
Notes: Looks like it still might be one week behind CD-1 plant
Week 2: Day 2 - one day after nutrient change and co2
Flower/Bloom Chamber
Strain: Medical Marijuan Genetics Candida (CD-1)
LED's: 6 x Samsung F-Series Gen.3 3000k 2' LED strips (LT-F562B w/ LM561C diodes)= 432 LED's total.
Power: 2.5A / 6 = 416mA per strip
Height to canopy: ~12"
Reservoir: 4L (1Gal) - tap water
Nutrients: Botanicare Pure Blend Pro Bloom 10ml, Pure Blend Pro Grow 10ml, Liquid Karma 5ml
PPM: 1150
pH: 6.0
Height of plant: ~11"
Growing Technique: LST
Notes: Added Liquid Karma and diy Co2
Veg Chamber
Strain: Expert Seeds Gorilla Glue #4 Auto
LED's: 5 x Bridgelux EB Gen.2 5000K 1' strips = 280 LED's total
Power: 700mA / 5 = 140mA per strip
Height:
Resevoir: 500ml (0.13Gal)
Nutriens Botanicare Pure Blend Pro Grow 1ml
PPM: 400
pH: 6.3
Notes: Looks like it still might be one week behind CD-1 plant
Week 2: Day 2 - one day after nutrient change and co2
~finally legal
-
- LED Enthusiast
- Reactions:
- Posts: 49
- Joined: Sat Mar 30, 2019 6:58 pm
Looking healthy.
Is it 115W flower and 14w veg side?
Is it 115W flower and 14w veg side?
Currently running 100W flower and 14W veg, that's total draw from the outlet using my kill-a-watt
~finally legal
Week 3: Day 1
Flower/Bloom Chamber
Strain: Medical Marijuana Genetics Candida (CD-1)
LED's: 6 x Samsung F-Series Gen.3 3000k 2' LED strips (LT-F562B w/ LM561C diodes)= 432 LED's total.
Power: 3.8A / 6 = 633mA per strip - 90VA 100W
Height to canopy: 8"
Reservoir: 11L (3Gal) - tap water
Nutrients: Botanicare Pure Blend Pro Bloom 50ml, Liquid Karma 9ml
PPM: 1050
pH: 6.0
Height of plant: 17.5"
Growing Technique: LST
Notes: Changed to bigger bucket half way through. Also upped the power to 3A and lowered to 10". I think I should have lowered the light earlier and turned up the power because it seemed like she stretched a lot, leaves block undergrowth. Leaves look like sativa so it could just be the strain characteristics
Veg Chamber
Strain: Expert Seeds Gorilla Glue #4 Auto
LED's: 5 x Bridgelux EB Gen.2 5000K 1' strips = 280 LED's total
Power: 700mA / 5 = 140mA per strip
Height:
Resevoir: 500ml (0.13Gal)
Nutriens Botanicare Pure Blend Pro Grow 1ml
PPM: 400
pH: 6.2
Notes: Looks like it still might be one week behind CD-1 plant. Leaves were drooping slightly since day before this post
Flower/Bloom Chamber
Strain: Medical Marijuana Genetics Candida (CD-1)
LED's: 6 x Samsung F-Series Gen.3 3000k 2' LED strips (LT-F562B w/ LM561C diodes)= 432 LED's total.
Power: 3.8A / 6 = 633mA per strip - 90VA 100W
Height to canopy: 8"
Reservoir: 11L (3Gal) - tap water
Nutrients: Botanicare Pure Blend Pro Bloom 50ml, Liquid Karma 9ml
PPM: 1050
pH: 6.0
Height of plant: 17.5"
Growing Technique: LST
Notes: Changed to bigger bucket half way through. Also upped the power to 3A and lowered to 10". I think I should have lowered the light earlier and turned up the power because it seemed like she stretched a lot, leaves block undergrowth. Leaves look like sativa so it could just be the strain characteristics
Veg Chamber
Strain: Expert Seeds Gorilla Glue #4 Auto
LED's: 5 x Bridgelux EB Gen.2 5000K 1' strips = 280 LED's total
Power: 700mA / 5 = 140mA per strip
Height:
Resevoir: 500ml (0.13Gal)
Nutriens Botanicare Pure Blend Pro Grow 1ml
PPM: 400
pH: 6.2
Notes: Looks like it still might be one week behind CD-1 plant. Leaves were drooping slightly since day before this post
~finally legal
-
- LED Enthusiast
- Reactions:
- Posts: 49
- Joined: Sat Mar 30, 2019 6:58 pm
They look good!
Did you have problems keeping ph balanced in the reservoir?
Can't wait to see the final result.
Did you have problems keeping ph balanced in the reservoir?
Can't wait to see the final result.
I did a couple weeks ago but not anymore it seems. I was thinking of getting some hydrogaurd to help the rootsSteveb123321 wrote: ↑Wed Apr 24, 2019 2:38 amThey look good!
Did you have problems keeping ph balanced in the reservoir?
Can't wait to see the final result.
~finally legal
-
- LED Enthusiast
- Reactions:
- Posts: 49
- Joined: Sat Mar 30, 2019 6:58 pm
No experience with hydroguard. I do believe in beneficial bacteria, I never washed my res out between grows. Never even rinse the hydroton .GrowFOUR wrote: ↑Wed Apr 24, 2019 9:44 pmI did a couple weeks ago but not anymore it seems. I was thinking of getting some hydrogaurd to help the rootsSteveb123321 wrote: ↑Wed Apr 24, 2019 2:38 amThey look good!
Did you have problems keeping ph balanced in the reservoir?
Can't wait to see the final result.