Hey all, just setting up a new veg tent and was looking at the 4000k 132 Boards @ HLG, I'm wanting to mount single drivers and came across this https://tinyurl.com/y34ja2le Is this a good driver for mounting on single boards?
I dont know much about matching drivers, ive just wired boards lol. Thanks!
Edit: Link to 132 Boards - https://horticulturelightinggroup.com/p ... ntum-board
QB132 Single Board Driver
According to the data sheet the current is too high for that board.Jordanwh wrote: ↑Sat May 25, 2019 4:18 amHey all, just setting up a new veg tent and was looking at the 4000k 132 Boards @ HLG, I'm wanting to mount single drivers and came across this https://tinyurl.com/y34ja2le Is this a good driver for mounting on single boards?
I dont know much about matching drivers, ive just wired boards lol. Thanks!
Edit: Link to 132 Boards - https://horticulturelightinggroup.com/p ... ntum-board
You need to use a smaller one
ELG 75-36 should do the job for you
https://www.google.com/url?sa=t&source= ... lrJcpklg-n
Find me on Instagram led_teknik
Ah right on. I saw it here https://forum.grasscity.com/threads/qb1 ... t.1529372/ dude seems to know alot and gives out a lot of advice, I know he mentions alot of how conservative HLG is with their numbers. The ELG is cheaper as well.TEKNIK wrote: ↑Sat May 25, 2019 4:51 amAccording to the data sheet the current is too high for that board.Jordanwh wrote: ↑Sat May 25, 2019 4:18 amHey all, just setting up a new veg tent and was looking at the 4000k 132 Boards @ HLG, I'm wanting to mount single drivers and came across this https://tinyurl.com/y34ja2le Is this a good driver for mounting on single boards?
I dont know much about matching drivers, ive just wired boards lol. Thanks!
Edit: Link to 132 Boards - https://horticulturelightinggroup.com/p ... ntum-board
You need to use a smaller one
ELG 75-36 should do the job for you
https://www.google.com/url?sa=t&source= ... lrJcpklg-n
Edit: I dont know alot about this stuff but that driver you linked is pretty much perfect for these boards ya? 36v and 2100mA that should max these out right?
Yes mate, should be at max and not go over it unless you play with the dials if they have them on the model you get. If you get one of the drivers without an earth be sure to earth it. Stupid how mean well are selling these without an earth to save 2 cents
Find me on Instagram led_teknik
https://www.mouser.com/ProductDetail/ME ... eOBg%3D%3D
I already have a type a driver, Im gussing they are all the same in terms of having that ground wire? I cant see from the picture if that model has one or not, Im guessing it does.
https://www.ebay.com/i/163585153453?chn=ps
Just a pic i pulled up from Ebay but I appears it does have a ground.
So I have a new question, What would be the best driver to max out 2 of these? Starting to realize buying 4 separate drivers might be a hassle and I think I would rather have 2 board fixtures anyways. Thanks!
A HLG 150-36 I guessJordanwh wrote: ↑Sat May 25, 2019 5:59 am
https://www.ebay.com/i/163585153453?chn=ps
Just a pic i pulled up from Ebay but I appears it does have a ground.
So I have a new question, What would be the best driver to max out 2 of these? Starting to realize buying 4 separate drivers might be a hassle and I think I would rather have 2 board fixtures anyways. Thanks!
Find me on Instagram led_teknik
LPF-60-36 non dimmable
LPF-60D-36 dimmable
HLG-60H-36a/b dimmable.
LPV-60 doesnt work.
LPC-60-1750 are dues tuesday ill test them.
ELG-100-36A-3y- 120w
HLG-120h-36A-140s
LPF-60D-36 dimmable
HLG-60H-36a/b dimmable.
LPV-60 doesnt work.
LPC-60-1750 are dues tuesday ill test them.
The 3Y version of the EGLS have an input earth but they are low voltage class 2 so i wouldn't be too bothered for our use.Jordanwh wrote: ↑Sat May 25, 2019 5:59 am
https://www.ebay.com/i/163585153453?chn=ps
Just a pic i pulled up from Ebay but I appears it does have a ground.
So I have a new question, What would be the best driver to max out 2 of these? Starting to realize buying 4 separate drivers might be a hassle and I think I would rather have 2 board fixtures anyways. Thanks!
ELG-100-36A-3y- 120w
HLG-120h-36A-140s
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
Meanwells are reliable, but if you stray too far from the hlg/elg lines efficiency take quite a hit.
Also worth noting ELG is cheaper and often as efficienct as HLG, but some of them have a lower output if used in the US with 110v input electricity.
Also worth noting ELG is cheaper and often as efficienct as HLG, but some of them have a lower output if used in the US with 110v input electricity.
"Nothing is true, everything is permitted"